gibuu is hosted by Hepforge, IPPP Durham
GiBUU

TABLE OF CONTENTS

/neutrinoAnalysis [ Modules ]

[ Top ] [ Modules ]

NAME

module neutrinoAnalysis

PURPOSE

  • This module does the analysis of the output of neutrino induced processes.

neutrinoAnalysis/detailed_diff_output [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save :: detailed_diff_output=.true.

PURPOSE

If .true. then also the detailed output of differential cross sections is produced

neutrinoAnalysis/forPion [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save :: forPion =.true.

PURPOSE

If .true. then also the detailed output of differential cross sections is produced

neutrinoAnalysis/forEta [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save :: forEta =.false.

PURPOSE

If .true. then also the detailed output of differential cross sections is produced

neutrinoAnalysis/forKaon [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save :: forKaon =.false.

PURPOSE

If .true. then also the detailed output of differential cross sections is produced

neutrinoAnalysis/forKaonBar [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save :: forKaonBar =.false.

PURPOSE

If .true. then also the detailed output of differential cross sections is produced

neutrinoAnalysis/forNucleon [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save :: forNucleon =.true.

PURPOSE

If .true. then also the detailed output of differential cross sections is produced

neutrinoAnalysis/forLambda [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save :: forLambda =.false.

PURPOSE

If .true. then also the detailed output of differential cross sections is produced

neutrinoAnalysis/forSigmaResonance [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save :: forSigmaResonance =.false.

PURPOSE

If .true. then also the detailed output of differential cross sections is produced

neutrinoAnalysis/include_W_dist [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save :: include_W_dist=.false.

PURPOSE

If .true. then the invariant mass distributions for events with 1 pion and 1 nucleon in the final state are produced

neutrinoAnalysis/dW_Npi [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save  :: dW_Npi=0.02

PURPOSE

for dsigma/d(InvariantMass); only work if include_W_dist is .true. set the min, max and steps for various W-distributions

neutrinoAnalysis/Wmin_Npi [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save  :: Wmin_Npi=1.08

PURPOSE

for dsigma/d(InvariantMass); only work if include_W_dist is .true. set the min, max and steps for various W-distributions

neutrinoAnalysis/Wmax_Npi [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save  :: Wmax_Npi=1.6

PURPOSE

for dsigma/d(InvariantMass); only work if include_W_dist is .true. set the min, max and steps for various W-distributions

neutrinoAnalysis/dW_mupi [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save  :: dW_mupi=0.04

PURPOSE

only work if include_W_dist is .true. set the min, max and steps for various W-distributions

neutrinoAnalysis/Wmin_mupi [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save  :: Wmin_mupi=0.24

PURPOSE

only work if include_W_dist is .true. set the min, max and steps for various W-distributions

neutrinoAnalysis/Wmax_mupi [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save  :: Wmax_mupi=1.2

PURPOSE

only work if include_W_dist is .true. set the min, max and steps for various W-distributions

neutrinoAnalysis/dW_muN [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save  :: dW_muN=0.04

PURPOSE

only work if include_W_dist is .true. set the min, max and steps for various W-distributions

neutrinoAnalysis/Wmin_muN [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save  :: Wmin_muN=1.04

PURPOSE

only work if include_W_dist is .true. set the min, max and steps for various W-distributions

neutrinoAnalysis/Wmax_muN [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save  :: Wmax_muN=2.12

PURPOSE

only work if include_W_dist is .true. set the min, max and steps for various W-distributions

neutrinoAnalysis/numin [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save  :: numin=0.

PURPOSE

for calorimetric analysis: values for transferred energy; only work if calorimetric_analysis is .true. set the min, max and bins for nu distributions

neutrinoAnalysis/numax [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save  :: numax=10.0

PURPOSE

for calorimetric analysis: values for transferred energy; only work if calorimetric_analysis is .true. set the min, max and bins for nu distributions

neutrinoAnalysis/nubin [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save  :: nubin=0.1

PURPOSE

for calorimetric analysis: values for transferred energy; only work if calorimetric_analysis is .true. set the min, max and bins for nu distributions

neutrinoAnalysis/Enumin [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save  :: Enumin=0.

PURPOSE

for calorimetric analysis: values for neutrino energy; only work if calorimetric_analysis is .true. set the min, max and bins for nu distributions

neutrinoAnalysis/Enumax [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save  :: Enumax=10.0

PURPOSE

for calorimetric analysis: values for neutrino energy; only work if calorimetric_analysis is .true. set the min, max and bins for nu distributions

neutrinoAnalysis/Enubin [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save  :: Enubin=0.1

PURPOSE

for calorimetric analysis: values for neutrino energy; only work if calorimetric_analysis is .true. set the min, max and bins for nu distributions

neutrinoAnalysis/EkinMin [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save :: EkinMin=0.

PURPOSE

if detailed_diff_output is TRUE: Maximal kinetic energy for dsigma/dEkin

neutrinoAnalysis/EkinMax [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save :: EkinMax=2.

PURPOSE

if detailed_diff_output is TRUE: Maximal kinetic energy for dsigma/dEkin

neutrinoAnalysis/dEkin [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save :: dEkin=0.01

PURPOSE

if detailed_diff_output is TRUE: Delta(eKin) for dsigma/dEKin

neutrinoAnalysis/kineticEnergyDetectionThreshold_nucleon [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save :: kineticEnergyDetectionThreshold_nucleon=0.0

PURPOSE

kineticEnergyDetectionThreshold

neutrinoAnalysis/kineticEnergyDetectionThreshold_chargedpion [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save :: kineticEnergyDetectionThreshold_chargedpion=0.0

PURPOSE

kineticEnergyDetectionThreshold

neutrinoAnalysis/kineticEnergyDetectionThreshold_neutralpion [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save :: kineticEnergyDetectionThreshold_neutralpion=0.0

PURPOSE

kineticEnergyDetectionThreshold

neutrinoAnalysis/EnergyDetectionThreshold_lepton [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save :: EnergyDetectionThreshold_lepton=0.0

PURPOSE

kineticEnergyDetectionThreshold

neutrinoAnalysis/radialScale [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save :: radialScale=0.0

PURPOSE

minimal radius

neutrinoAnalysis/inclusiveAnalysis [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save ::  inclusiveAnalysis=.false.

PURPOSE

If .true. then we don't care whether particle has left the nucleus or not

neutrinoAnalysis/Fissum_analysis [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save ::  Fissum_analysis=.false.

PURPOSE

do analysis with cuts as needed for Fig 25 in Fissum et al, PRC 70, 034606 (2004)

neutrinoAnalysis/ZeroPion_analysis [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save ::  ZeroPion_analysis=.false.

PURPOSE

produce output of xsec for various final states with 0 pions and 2 pions see file see sigma_0pions.dat for the list of the final states

see files neutrino_0pions.dat, neutrino_0pions_QE.dat, neutrino_0pions_Delta.dat, ... for output

neutrinoAnalysis/calorimetric_analysis [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save ::  calorimetric_analysis=.false.

PURPOSE

do calorimetric enregy-transfer and neutrino-energy reconstruction (for each QE, Delta, ...) as in the MINOS experiment

neutrinoAnalysis/reconstruct_neutrino_energy [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save ::  reconstruct_neutrino_energy=.false.

PURPOSE

reconstruct neutrino energy for final state in "specificEvent_analysis"

NOTES

.true. must be combined with specificEvent_analysis=.true. and at least one specific event .true.

neutrinoAnalysis/specificEvent_analysis [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save ::  specificEvent_analysis=.false.

PURPOSE

do analysis for specific final states

values can be changed in the namelist nl_specificEvent

neutrinoAnalysis/no_pi [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save ::  no_pi=.false.

PURPOSE

do analysis for specific final states: specificEvent=1, no_pi (for example, for QE-like MiniBooNE)

values can be changed in the namelist nl_specificEvent

neutrinoAnalysis/p_Xn_no_pi [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save ::  p_Xn_no_pi=.false.

PURPOSE

do analysis for specific final states: specificEvent=2

values can be changed in the namelist nl_specificEvent

neutrinoAnalysis/piplus [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save ::  piplus=.false.

PURPOSE

do analysis for specific final states: specificEvent=3, 1 pi+ X nucleons, piplus (1 pi+ MiniBooNE)

values can be changed in the namelist nl_specificEvent

neutrinoAnalysis/pi0 [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save ::  pi0=.false.

PURPOSE

do analysis for specific final states: specificEvent=4, 1 pi0 X nucleons, pi0 (1pi0 MiniBooNE)

values can be changed in the namelist nl_specificEvent

neutrinoAnalysis/pi0_MULTI [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save ::  pi0_MULTI=.false.

PURPOSE

do analysis for specific final states: specificEvent=5, >=1 pi0 X other pions X nucleons, (pi0 K2K)

values can be changed in the namelist nl_specificEvent

neutrinoAnalysis/piplus_MULTI [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save ::  piplus_MULTI=.false.

PURPOSE

do analysis for specific final states: specificEvent=6 >=1 pi+ X other pions X nucleons

values can be changed in the namelist nl_specificEvent

neutrinoAnalysis/pp_no_pi [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save ::  pp_no_pi=.false.

PURPOSE

do analysis for specific final states: specificEvent=7

values can be changed in the namelist nl_specificEvent

neutrinoAnalysis/pn_no_pi [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save ::  pn_no_pi=.false.

PURPOSE

do analysis for specific final states: specificEvent=8

values can be changed in the namelist nl_specificEvent

neutrinoAnalysis/nn_no_pi [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save ::  nn_no_pi=.false.

PURPOSE

do analysis for specific final states: specificEvent=9

values can be changed in the namelist nl_specificEvent

neutrinoAnalysis/pp_Xn_no_pi [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save ::  pp_Xn_no_pi=.false.

PURPOSE

do analysis for specific final states: specificEvent=10

values can be changed in the namelist nl_specificEvent

neutrinoAnalysis/nn_Xp_no_pi [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save ::  nn_Xp_no_pi=.false.

PURPOSE

do analysis for specific final states: specificEvent=11

values can be changed in the namelist nl_specificEvent

neutrinoAnalysis/ppp_Xn_no_pi [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save ::  ppp_Xn_no_pi=.false.

PURPOSE

do analysis for specific final states: specificEvent=12

values can be changed in the namelist nl_specificEvent

neutrinoAnalysis/pppp_Xn_no_pi [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save ::  pppp_Xn_no_pi=.false.

PURPOSE

do analysis for specific final states: specificEvent=13

values can be changed in the namelist nl_specificEvent

neutrinoAnalysis/p_no_pi [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save ::  p_no_pi=.false.

PURPOSE

do analysis for specific final states: specificEvent=14

values can be changed in the namelist nl_specificEvent

neutrinoAnalysis/n_no_pi [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save ::  n_no_pi=.false.

PURPOSE

do analysis for specific final states: specificEvent=15

values can be changed in the namelist nl_specificEvent

neutrinoAnalysis/Xn_no_pi [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save ::  Xn_no_pi=.false.

PURPOSE

do analysis for specific final states: specificEvent=16, no proton

values can be changed in the namelist nl_specificEvent

neutrinoAnalysis/binsizeQ2 [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save    ::  binsizeQ2=0.01

PURPOSE

do analysis for specific final states: binning for reconstruction of Q2 and Enu

values can be changed in the namelist nl_specificEvent

neutrinoAnalysis/binsizeEnu [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save    ::  binsizeEnu=0.02

PURPOSE

do analysis for specific final states: binning for reconstruction of Q2 and Enu

values can be changed in the namelist nl_specificEvent

neutrinoAnalysis/maxQ2 [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save    ::  maxQ2=5.0

PURPOSE

do analysis for specific final states: max values for reconstruction of Q2 and Enu

values can be changed in the namelist nl_specificEvent

neutrinoAnalysis/maxEnu [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  real, save    ::  maxEnu=5.0

PURPOSE

do analysis for specific final states: max values for reconstruction of Q2 and Enu

values can be changed in the namelist nl_specificEvent

neutrinoAnalysis/outputEvents [ Global module-variables ]

[ Top ] [ neutrinoAnalysis ] [ Global module-variables ]

SOURCE

  logical, save  :: outputEvents = .false.

PURPOSE

If .true. then all events are printed to the file 'FinalEvents.dat'.

neutrinoAnalysis/readinput [ Subroutines ]

[ Top ] [ neutrinoAnalysis ] [ Subroutines ]

NAME

subroutine readinput

INPUTS

NONE

OUTPUT

NONE

PURPOSE

This subroutine reads out the namelist "neutrinoAnalysis". Only called once to initialize the module.

neutrinoAnalysis/NeutrinoAnalysis [ Namelists ]

[ Top ] [ neutrinoAnalysis ] [ Namelists ]

NAME

NAMELIST /NeutrinoAnalysis/

PURPOSE

This namelist includes:

neutrinoAnalysis/W_distributions [ Namelists ]

[ Top ] [ neutrinoAnalysis ] [ Namelists ]

NAME

NAMELIST /W_distributions/

PURPOSE

This Namelist includes:

neutrinoAnalysis/nl_calorimetric_analysis [ Namelists ]

[ Top ] [ neutrinoAnalysis ] [ Namelists ]

NAME

NAMELIST /nl_calorimetric_analysis/

PURPOSE

This Namelist includes:

neutrinoAnalysis/nl_specificEvent [ Namelists ]

[ Top ] [ neutrinoAnalysis ] [ Namelists ]

NAME

NAMELIST /nl_specificEvent/

PURPOSE

This namelist includes:

neutrinoAnalysis/detailed_diff [ Namelists ]

[ Top ] [ neutrinoAnalysis ] [ Namelists ]

NAME

NAMELIST /detailed_diff/

PURPOSE

This namelist includes:

neutrinoAnalysis/neutrino_Analyze [ Subroutines ]

[ Top ] [ neutrinoAnalysis ] [ Subroutines ]

NAME

subroutine neutrino_Analyze(Particles,finalFlag,num_runs_sameEnergy)

INPUTS

  • type(particle), intent(in),dimension(:,:) :: Particles -- Particles which shall be analyzed
  • logical, intent(in) :: finalFlag -- if .true. than the final output for a series of calls will be done
  • integer :: num_runs_sameEnergy

NOTES

  • This subroutine produces output for neutrino-nucleus scattering.

neutrinoAnalysis/neutrino_total_Xsection_multiplicities.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file neutrino_total_Xsection_multiplicities.dat

PURPOSE

The file is produced in the runs with eventtype=5=neutrino .

The file shows the cross sections for preselected final states

Units:

  • For process_ID=CC and NC the units 10^{-38} cm^2 for integrated xsec (10^{-38)cm^2/GeV for dsigma/dElepton, 10^{-38)cm^2/GeV^2 for dsigma/dQ^2, and so on)
  • For process_ID=EM the units are nanobarns=10^{-33}cm^2

Columns:

Some columns in detail:

  • #2: 1 pi-, no other pions of any charge and anything else
  • #3: 1 pi0, no other pions of any charge and anything else
  • #4: 1 pi+, no other pions of any charge and anything else
  • #5: 1 eta and anything else
  • #14: 1 neutron, no other nucleons and anything else
  • #15: 1 proton, no other nucleons and anything else
  • #68: 1 nucleon and 1 pion, no other pions or nucleons, anything else
  • #68: 1 proton (no other nucleons) and 0 pions and anything else (QE-like in Cherenkov detector)
  • #69: 0 pions and anything else
  • #70: at least 1 pi-, any number of pi0 and/or pi+ , anything else, each event is counted once
  • #71: at least 1 pi0, any number of pi- and/or pi+ , anything else, each event is counted once
  • #72: at least 1 pi+, any number of pi- and/or pi0 , anything else, each event is counted once
  • #91: at least 1 pi0, any number of pi- and/or pi+ , anything else, each pi0 is counted
  • #96: no nucleons, anything else
  • #97: 5 or more nucleons, anything else
  • #101-#199: errors to Columns #2-#99

neutrinoAnalysis/neutrino_total_Xsection_multiplicities_QE.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file neutrino_total_Xsection_multiplicities_QE.dat

PURPOSE

The same as neutrino_total_Xsection_multiplicities.dat but for QE events (=the first interaction was quasielastic or elastic scattering)

neutrinoAnalysis/neutrino_total_Xsection_multiplicities_Delta.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file neutrino_total_Xsection_multiplicities_Delta.dat

PURPOSE

The same as neutrino_total_Xsection_multiplicities.dat but for Delta events (=the first interaction was production of the Delta resonance)

neutrinoAnalysis/neutrino_total_Xsection_multiplicities_highRES.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file neutrino_total_Xsection_multiplicities_highRES.dat

PURPOSE

The same as neutrino_total_Xsection_multiplicities.dat but for highRES events (=the first interaction was production any resonance beyond Delta)

neutrinoAnalysis/neutrino_total_Xsection_multiplicities_1piBG.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file neutrino_total_Xsection_multiplicities_1piBG.dat

PURPOSE

The same as neutrino_total_Xsection_multiplicities.dat but for 1piBG events (=the first interaction was production of 1-pion final state)

neutrinoAnalysis/neutrino_total_Xsection_multiplicities_DIS.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file neutrino_total_Xsection_multiplicities_DIS.dat

PURPOSE

The same as neutrino_total_Xsection_multiplicities.dat but for DIS events (=the first interaction was DIS)

neutrinoAnalysis/neutrino_total_Xsection_multiplicities_2p2h.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file neutrino_total_Xsection_multiplicities_2p2h.dat

PURPOSE

The same as neutrino_total_Xsection_multiplicities.dat but for 2particle-2hole events

neutrinoAnalysis/neutrino_total_Xsection_multiplicities_gen0.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file neutrino_total_Xsection_multiplicities_gen0.dat

PURPOSE

The same as neutrino_total_Xsection_multiplicities.dat for particles of the 0th generation The definition of generation is given in history.f90, description of the module "history"

neutrinoAnalysis/neutrino_total_Xsection_multiplicities_gen1.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file neutrino_total_Xsection_multiplicities_gen1.dat

PURPOSE

The same as neutrino_total_Xsection_multiplicities.dat for particles of the 1st generation The definition of generation is given in history.f90, description of the module "history"

neutrinoAnalysis/neutrino_total_Xsection_multiplicities_gen2.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file neutrino_total_Xsection_multiplicities_gen2.dat

PURPOSE

The same as neutrino_total_Xsection_multiplicities.dat for particles of the 2nd generation The definition of generation is given in history.f90, description of the module "history"

neutrinoAnalysis/neutrino_total_Xsection_multiplicities_gen3ormore.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file neutrino_total_Xsection_multiplicities_gen3ormore.dat

PURPOSE

The same as neutrino_total_Xsection_multiplicities.dat for particles of the 3rd-or-more generation The definition of generation is given in history.f90, description of the module "history"

neutrinoAnalysis/neutrino_kinetic_energy_Xsection.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file neutrino_kinetic_energy_Xsection.dat

PURPOSE

The file is produced in the runs with eventtype=5=neutrino .

The file shows the kinetic energy differential cross sections after final state interactions

Units:

  • For process_ID=CC and NC: 10^{-38} cm^2/GeV for integrated xsec and so on ..
  • For process_ID=EM: nanobarns=10^{-33}cm^2/ GeV and so on.

Columns:

  • #1: variable which was raised (e.g. Q^2 for nuXsectionMode=3=dSigmadQs mode, Elepton for nuXsectionMode=2=dSigmadQsdElepton and so on)
  • #2: kinetic energy in GeV
  • #3: xsec for events with at least one pi- in the final state (coincides with column 2 in diff_XXX_dSigma_dEkin_pi_charge_-1_MULTI.dat)
  • #4: xsec for events with at least one pi0 (coincides with column 2 in diff_XXX_dSigma_dEkin_pi_charge_+0_MULTI.dat)
  • #5: xsec for events with at least one pi+ (coincides with column 2 in diff_XXX_dSigma_dEkin_pi_charge_+1_MULTI.dat)
  • #6: xsec for events with at least one neutron (coincides with column 2 in diff_XXX_dSigma_dEkin_N_charge_+0_MULTI.dat)
  • #7: xsec for events with at least one proton (coincides with column 2 in diff_XXX_dSigma_dEkin_N_charge_+1_MULTI.dat)

HERE XXX=000,001, ... is the count of the raise variable

neutrinoAnalysis/neutrino_Xsection_numbers.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file neutrino_Xsection_numbers.dat

PURPOSE

The file is produced in the runs with eventtype=5=neutrino .

The file shows number of nucleons produced in one run before and after final state interactions (should be devided by numEnsembles to obtain the average multiplicity per target nucleus and divided further by target_A to obtain the average multiplicity per target nucleon)

Columns:

  • #1: variable which was raised (e.g. Q^2 for nuXsectionMode=3=dSigmadQs mode, Elepton for nuXsectionMode=2=dSigmadQsdElepton and so on)
  • #2: all the protons produced before final state interactions (FSI)
  • #3: protons that made it out of the nucleus after FSI
  • #4: protons produced in generation 0 and made it out of the nucleus after FSI
  • #5: protons produced in generation 1 and made it out of the nucleus after FSI
  • #6: protons produced in generation 2 and made it out of the nucleus after FSI
  • #7: protons produced in generation 3-or-more and made it out of the nucleus after FSI
  • #8: all the neutrons produced before FSI
  • #9: neutrons that made it out of the nucleus after FSI
  • #10: neutrons produced in generation 0 and made it out of the nucleus after FSI
  • #11: neutrons produced in generation 1 and made it out of the nucleus after FSI
  • #12: neutrons produced in generation 2 and made it out of the nucleus after FSI
  • #13: neutrons produced in generation 3-or-more and made it out of the nucleus after FSI
  • #14: all the antiprotons produced before FSI
  • #15: antiprotons that made it out of the nucleus after FSI
  • #16: antiprotons produced in generation 0 and made it out of the nucleus after FSI
  • #17: antiprotons produced in generation 1 and made it out of the nucleus after FSI
  • #18: antiprotons produced in generation 2 and made it out of the nucleus after FSI
  • #19: antiprotons produced in generation 3-or-more and made it out of the nucleus after FSI

neutrinoAnalysis/diff_XXX_dSigma_dEkin_HADRON_charge_CHARGE.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file diff_XXX_dSigma_dEkin_HADRON_charge_CHARGE.dat

with:

  • XXX=000, 001, 002 --- the first, second, third and so on values of the "raised variable" (e.g. Q^2 for nuXsectionMode=3=dSigmadQs mode, Elepton for nuXsectionMode=2=dSigmadQsdElepton and so on)
  • HADRON = pion, N, K, K~, Lambda, SigmaResonance, eta only those are shown, for which the switches in the namelist "detailed_diff" are set to .true.
  • CHARGE = charge of the outgoing hadron

PURPOSE

The file is produced in runs with:

The file shows the cross sections for ___1-HADRON___ final state versus kinetic energy of the outgoing hadron (one HADRON of a given CHARGE and no HADRONs of different charges)

Units:

Columns:

  • #1: kinetic energy of the outgoing HADRON of given CHARGE [GeV]
  • #2: dsi/dEkin xsec
  • #3: number of events contributed (only for internal use, you can safely neglect it)
  • #4: xsec-statistical-error

neutrinoAnalysis/diff_XXX_dSigma_dEkin_HADRON_charge_CHARGE_1X.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file diff_XXX_dSigma_dEkin_HADRON_charge_CHARGE_1X.dat

PURPOSE

The same as diff_XXX_dSigma_dEkin_HADRON_charge_CHARGE.dat but for ___1-HADRON-X___ final state (one HADRON of a given CHARGE and any number of HADRONs of different charges)

neutrinoAnalysis/diff_XXX_dSigma_dEkin_HADRON_charge_CHARGE_2X.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file diff_XXX_dSigma_dEkin_HADRON_charge_CHARGE_2X.dat

PURPOSE

The same as diff_XXX_dSigma_dEkin_HADRON_charge_CHARGE.dat but for ___2-HADRON-X___ final state (two HADRONs of a given CHARGE and any number of HADRONs of different charges)

neutrinoAnalysis/diff_XXX_dSigma_dEkin_HADRON_charge_CHARGE_MULTI.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file diff_XXX_dSigma_dEkin_HADRON_charge_CHARGE_MULTI.dat

PURPOSE

The same as diff_XXX_dSigma_dEkin_HADRON_charge_CHARGE.dat but for ___MULTI-HADRON___ final state (at least one HADRON of a given CHARGE and any number of HADRONs of different charges)

neutrinoAnalysis/diff_XXX_dSigma_dEcostheta_HADRON_charge_CHARGE.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file diff_XXX_dSigma_dEcostheta_HADRON_charge_CHARGE.dat

file diff_XXX_dSigma_dEcostheta_HADRON_charge_CHARGE_1X.dat

file diff_XXX_dSigma_dEcostheta_HADRON_charge_CHARGE_2X.dat

file diff_XXX_dSigma_dEcostheta_HADRON_charge_CHARGE_MULTI.dat)

PURPOSE

The same as diff_XXX_dSigma_dEkin_HADRON_charge_CHARGE.dat but dsigma/d(E(1-cosTheta))

The file is produced in runs with:

The file shows the cross sections dsigma/d(E(1-cosTheta)) versus E*(1-costheta), where E is the energy (full energy, not kinetic) of the outgoing hadron, costheta its polar scattering angle (recall here that in neutrino runs neutrinos are moving along z-direction)

Columns:

  • #1: E*(1-cosTheta) [GeV]
  • #2: dsi/d(E(1-costheta)) xsec
  • #3: number of events contributed (only for internal use, you can safely neglect it)
  • #4: xsec-statistical-error

neutrinoAnalysis/diff_XXX_dSigma_dTheta_HADRON_charge_CHARGE.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file diff_XXX_dSigma_dTheta_HADRON_charge_CHARGE.dat

file diff_XXX_dSigma_dTheta_HADRON_charge_CHARGE_1X.dat

file diff_XXX_dSigma_dTheta_HADRON_charge_CHARGE_2X.dat

file diff_XXX_dSigma_dTheta_HADRON_charge_CHARGE_MULTI.dat

PURPOSE

The same as diff_XXX_dSigma_dEkin_HADRON_charge_CHARGE.dat but dsigma/dTheta

The file is produced in runs with:

The file shows the cross sections dsigma/dTheta versus Theta, where Theta is the polar scattering angle (in radians) of the outgoing hadron (recall here that in neutrino runs neutrinos are moving along z-direction)

Columns:

  • #1: Theta [radians]
  • #2: dsi/dTheta xsec
  • #3: number of events contributed (only for internal use, you can safely neglect it)
  • #4: xsec-statistical-error

neutrinoAnalysis/diff_XXX_dSigma_dEkin_lepton_PPP.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file diff_XXX_dSigma_dEkin_lepton_PPP.dat

with:

PURPOSE

The file is produced in runs with:

The file shows the cross sections for a specific final state versus kinetic energy of the outgoing lepton

Units:

Columns:

  • #1: kinetic energy of the outgoing lepton [GeV]
  • #2: dsi/dEkin xsec
  • #3: number of events contributed (only for internal use, you can safely neglect it)
  • #4: xsec-statistical-error

neutrinoAnalysis/diff_XXX_dSigma_dQ2_lepton_PPP.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file diff_XXX_dSigma_dQ2_lepton_PPP.dat

PURPOSE

The same as diff_XXX_dSigma_dEkin_lepton_PPP.dat but for dsigma/dQ2

The file shows the cross sections for a specific final state versus Q2

Units:

Columns:

  • #1: Q2 [GeV^2] squared transfer momentum (Q2 = -q_mu \cdot q^\mu)
  • #2: dsi/dQ2 xsec
  • #3: number of events contributed (only for internal use, you can safely neglect it)
  • #4: xsec-statistical-error

neutrinoAnalysis/diff_XXX_dSigma_dcos_lepton_PPP.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file diff_XXX_dSigma_dcos_lepton_PPP.dat

PURPOSE

The same as diff_XXX_dSigma_dEkin_lepton_PPP.dat but for dsigma/dcos(theta_l)

The file shows the cross sections for a specific final state versus cos of the scattering angle of the outgoin lepton (with respect to neutrino direction)

Units:

Columns:

  • #1: cos(theta_l) cos of the scattering angle of the outgoing lepton
  • #2: dsi/dcos(theta_l) xsec
  • #3: number of events contributed (only for internal use, you can safely neglect it)
  • #4: xsec-statistical-error

neutrinoAnalysis/diff_XXX_dSigma_dW_nucleon_pion_charge_CHARGE.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file diff_XXX_dSigma_dW_nucleon_pion_charge_CHARGE.dat

PURPOSE

Similar to diff_XXX_dSigma_dEkin_HADRON_charge_CHARGE.dat (see notations XXX and CHARGE there) but gives pion-nucleon invariant mass (W) distribution (true invariant mass with the sum of the 4-momenta of the outgoing particles, W^2=(p_1out+p_2out) as opposed to widely used W2=mN2+2*mN*nu-Q2 from lepton kinematics ) for events with ___1pion___ AND ___1nucleon___ in the final state

neutrinoAnalysis/diff_XXX_dSigma_dW_muon_nucleon_charge_CHARGE.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file diff_XXX_dSigma_dW_muon_nucleon_charge_CHARGE.dat

PURPOSE

The same as diff_XXX_dSigma_dW_nucleon_pion_charge_CHARGE.dat but for the muon-nucleon invariant mass distribution

NOTES

Note that CHARGE is still a pion charge

neutrinoAnalysis/diff_XXX_dSigma_dW_muon_pion_charge_CHARGE.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file diff_XXX_dSigma_dW_muon_pion_charge_CHARGE.dat

PURPOSE

The same as diff_XXX_dSigma_dW_nucleon_pion_charge_CHARGE.dat but for the muon-pion invariant mass distribution

NOTES

Note that CHARGE is still a pion charge

neutrinoAnalysis/FinalEvents.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file FinalEvents.dat

PURPOSE

The file shows the outgoing particles. It is enabled by the switch 'outputEvents'.

Columns:

NOTES

For large target_A, numEnsembles and num_runs_SameEnergy, this file may become very large, e.g.:

  • target_A=12, 1000ens x 20runs, QE and Delta results in 41 Mb
  • target_A=56, 2000ens x 5runs, QE,Delta,highRES,1piBG,DIS results in 500 Mb

neutrinoAnalysis/reconstruction_Enureal_PPP.ZZZ.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file reconstruction_Enureal_PPP.ZZZ.dat

PURPOSE

Similar to reconstruction_Enurec_PPP.ZZZ.dat, but for true neutrino energy

The file shows the event distribution (flux-folded xsec) versus true neutrino energy for a specific final state The file is produced only for the runs with a neutrino flux (in the namelist "neutrino_induced" nuXsectionMode > 10, nuExp>0)

Columns:

  • #1: true neutrino energy [GeV]
  • #2: flux-folded xsec
  • #3: number of events contributed (only for internal use, you can safely neglect it)
  • #4: xsec-statistical-error

neutrinoAnalysis/reconstruction_Enurec_PPP.ZZZ.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file reconstruction_Enurec_PPP.ZZZ.dat

with:

PURPOSE

The file shows the xsec versus reconstructed neutrino energy (see arXiv:1208.3678 [nucl-th]) for a specific final state

Reconstruction method depends on a specific process; * generally for no_pion events it is based on QE-like kinematics * and for pion events it is based on on-shell-Delta-creation assumption

The file is produced in runs with:

Units:

Columns:

  • #1: reconstructed neutrino energy [GeV]
  • #2: xsec
  • #3: number of events contributed (only for internal use, you can safely neglect it)
  • #4: xsec-statistical-error

neutrinoAnalysis/reconstruction_Enu_rec_versus_real_PPP.ZZZ.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file reconstruction_Enu_rec_versus_real_PPP.ZZZ.dat

PURPOSE

Similar to reconstruction_Enurec_PPP.ZZZ.dat, but double-differential

The file shows the 2-D density of the xsec (see arXiv:1208.3678 [nucl-th]) versus true and reconstructed neutrino energies for a specific final state The file is produced only for the runs with a neutrino flux (in the namelist "neutrino_induced" nuXsectionMode > 10, nuExp>0)

Units:

  • For event_type=5 and process_ID=CC and NC: 10^{-38} cm^2/GeV^2

Columns:

  • #1: true neutrino energy [GeV]
  • #2: reconstructed neutrino energy [GeV]
  • #3: flux-folded xsec
  • #4: number of events contributed (only for internal use, you can safely neglect it)
  • #5: xsec-statistical-error

NOTES

up to normalization this is "migration matrix" between true and reconstructed energies

neutrinoAnalysis/reconstruction_Q2real_PPP.ZZZ.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file reconstruction_Q2real_PPP.ZZZ.dat

PURPOSE

Similar to reconstruction_Enurec_PPP.ZZZ.dat, but for the true Q2

The file shows the dsi/dQ^2 xsec versus true Q2 for a specific final state

Units:

Columns:

  • #1: true Q2 [GeV^2] (squared momentum transfer Q2 = - q_mu \cdot q^mu)
  • #2: dsi/dQ2true
  • #3: number of events contributed (only for internal use, you can safely neglect it)
  • #4: xsec-statistical-error

neutrinoAnalysis/reconstruction_Q2rec_PPP.ZZZ.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file reconstruction_Q2rec_PPP.ZZZ.dat

PURPOSE

Similar to reconstruction_Enurec_PPP.ZZZ.dat, but for the reconstructed Q2 (see arXiv:1208.3678 [nucl-th])

The file shows the dsi/dQ^2 xsec versus reconstructed Q2 for a specific final state

Units:

Columns:

  • #1: recontructed Q2 [GeV^2] (squared momentum transfer Q2 = - q_mu \cdot q^mu)
  • #2: dsi/dQ2rec
  • #3: number of events contributed (only for internal use, you can safely neglect it)
  • #4: xsec-statistical-error

neutrinoAnalysis/reconstruction_Q2_rec_versus_real_PPP.ZZZ.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file reconstruction_Q2_rec_versus_real_PPP.ZZZ.dat

PURPOSE

Similar to reconstruction_Enurec_PPP.ZZZ.dat, but double-differential in Q2

The file shows the dsigma/dQ2true dQ2rec distribution versus true and reconstructed Q^2 for a specific final state

Units:

Columns:

  • #1: true Q2 [GeV^2]
  • #2: reconstructed Q2 [GeV^2]
  • #3: dsigma/dQ2true dQ2rec
  • #4: number of events contributed (only for internal use, you can safely neglect it)
  • #5: xsec-statistical-error

neutrinoAnalysis/oscillations_UUU_real_PPP.ZZZ.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file oscillations_UUU_real_PPP.ZZZ.dat

with:

  • UUU = "mumu", "mue", "mue_max", "mue_antimax" for oscillation of a given experimental flux for muon_neutrino survival ("mumu"), mu_e appearance with delta_CP=0 ("mue"), delta_CP=pi ("mue_max"), delta_CP=-pi ("mue_antimax")
  • PPP = no_pi, p_Xn_no_pi, piplus, pi0, .... (see namelist nl_specificEvent for the full list) standing for the specific final state under consideration
  • ZZZ=000 - 008 is the origin (the first interaction vertex) of the event (see description in neutrino.EprimeCostplaneXS.ZZZ.dat)

PURPOSE

Similar to reconstruction_Enureal_PPP.ZZZ.dat, but for oscillated neutrino flux

Columns:

  • #1: true neutrino energy [GeV]
  • #2: flux-folded xsec
  • #3: number of events contributed (only for internal use, you can safely neglect it)
  • #4: xsec-statistical-error

neutrinoAnalysis/oscillations_UUU_rec_PPP.ZZZ.dat [ Output files ]

[ Top ] [ neutrinoAnalysis ] [ Output files ]

NAME

file oscillations_UUU_rec_PPP.ZZZ.dat

with:

  • UUU = "mumu", "mue", "mue_max", "mue_antimax" for oscillation of a given experimental flux for muon_neutrino survival ("mumu"), mu_e appearance with delta_CP=0 ("mue"), delta_CP=pi ("mue_max"), delta_CP=-pi ("mue_antimax")
  • PPP = no_pi, p_Xn_no_pi, piplus, pi0, .... (see namelist nl_specificEvent for the full list) standing for the specific final state under consideration
  • ZZZ=000 - 008 is the origin (the first interaction vertex) of the event (see description in neutrino.EprimeCostplaneXS.ZZZ.dat)

PURPOSE

Similar to reconstruction_Enurec_PPP.ZZZ.dat, but for oscillated neutrino flux

Columns:

  • #1: reconstructed neutrino energy [GeV]
  • #2: flux-folded xsec
  • #3: number of events contributed (only for internal use, you can safely neglect it)
  • #4: xsec-statistical-error