gibuu is hosted by Hepforge, IPPP Durham
GiBUU

# Changes between Version 3 and Version 4 of TracInstall

Ignore:
Timestamp:
Jul 17, 2018, 3:10:47 PM (16 months ago)
Comment:

--

### Legend:

Unmodified
 v3 = Trac Installation Guide for 1.0 = = Trac Installation Guide for 1.2 [[TracGuideToc]] Trac is written in the Python programming language and needs a database, [http://sqlite.org/ SQLite], [http://www.postgresql.org/ PostgreSQL], or [http://mysql.com/ MySQL]. For HTML rendering, Trac uses the [http://genshi.edgewall.org Genshi] templating system. Since version 0.12, Trac can also be localized, and there's probably a translation available for your language. If you want to be able to use the Trac interface in other languages, then make sure you have installed the optional package [#OtherPythonPackages Babel]. Pay attention to the extra steps for localization support in the [#InstallingTrac Installing Trac] section below. Lacking Babel, you will only get the default english version, as usual. If you're interested in contributing new translations for other languages or enhance the existing translations, then please have a look at [[trac:TracL10N]]. What follows are generic instructions for installing and setting up Trac and its requirements. While you may find instructions for installing Trac on specific systems at [trac:TracInstallPlatforms TracInstallPlatforms] on the main Trac site, please be sure to '''first read through these general instructions''' to get a good understanding of the tasks involved. Trac can also be localized, and there is probably a translation available in your language. If you want to use the Trac interface in other languages, then make sure you have installed the optional package [#OtherPythonPackages Babel]. Pay attention to the extra steps for localization support in the [#InstallingTrac Installing Trac] section below. Lacking Babel, you will only get the default English version. If you're interested in contributing new translations for other languages or enhancing the existing translations, then please have a look at [trac:wiki:TracL10N TracL10N]. What follows are generic instructions for installing and setting up Trac. While you may find instructions for installing Trac on specific systems at [trac:TracInstallPlatforms TracInstallPlatforms], please '''first read through these general instructions''' to get a good understanding of the tasks involved. [[PageOutline(2-3,Installation Steps,inline)]] == Dependencies == == Dependencies === Mandatory Dependencies To install Trac, the following software packages must be installed: * [http://www.python.org/ Python], version >= 2.5 and < 3.0 (note that we dropped the support for Python 2.4 in this release) * [http://peak.telecommunity.com/DevCenter/setuptools setuptools], version >= 0.6, or better yet, [http://pypi.python.org/pypi/distribute distribute] * [http://genshi.edgewall.org/wiki/Download Genshi], version >= 0.6 (unreleased version 0.7dev should work as well) You also need a database system and the corresponding python bindings. The database can be either SQLite, PostgreSQL or MySQL. * [http://www.python.org/ Python], version >= 2.6 and < 3.0 (note that we dropped the support for Python 2.5 in this release) * [http://pypi.python.org/pypi/setuptools setuptools], version >= 0.6 * [http://genshi.edgewall.org/wiki/Download Genshi], version >= 0.6 You also need a database system and the corresponding python bindings. The database can be either SQLite, PostgreSQL or MySQL. ==== For the SQLite database #ForSQLite As you must be using Python 2.5, 2.6 or 2.7, you already have the SQLite database bindings bundled with the standard distribution of Python (the sqlite3 module). However, if you'd like, you can download the latest and greatest version of [[trac:Pysqlite]] from [http://code.google.com/p/pysqlite/downloads/list google code], where you'll find the Windows installers or the tar.gz archive for building from source: {{{ $tar xvfz .tar.gz$ cd $python setup.py build_static install }}} This will download the latest SQLite code and build the bindings. SQLite 2.x is no longer supported. A known bug PySqlite versions 2.5.2-4 prohibits upgrade of trac databases from 0.11.x to 0.12. Please use versions 2.5.5 and newer or 2.5.1 and older. See #9434 for more detail. See additional information in [trac:PySqlite PySqlite]. As you must be using Python 2.6 or 2.7, you already have the SQLite database bindings bundled with the standard distribution of Python (the sqlite3 module). Optionally, you may install a newer version of [http://pypi.python.org/pypi/pysqlite pysqlite] than the one provided by the Python distribution. See [trac:PySqlite#ThePysqlite2bindings PySqlite] for details. ==== For the PostgreSQL database #ForPostgreSQL You need to install the database and its Python bindings: * [http://www.postgresql.org/ PostgreSQL], version 8.0 or later * [http://pypi.python.org/pypi/psycopg2 psycopg2] * [http://pypi.python.org/pypi/psycopg2 psycopg2], version 2.0 or later See [trac:DatabaseBackend#Postgresql DatabaseBackend] for details. ==== For the MySQL database #ForMySQL Trac can now work quite well with MySQL, provided you follow the guidelines. Trac works well with MySQL, provided you follow the guidelines: * [http://mysql.com/ MySQL], version 5.0 or later * [http://sf.net/projects/mysql-python MySQLdb], version 1.2.2 or later It is '''very''' important to read carefully the [trac:MySqlDb] page before creating the database. Given the caveats and known issues surrounding MySQL, read carefully the [trac:MySqlDb] page before creating the database. === Optional Dependencies ==== Version Control System ==== ===== Subversion ===== * [http://subversion.apache.org/ Subversion], 1.5.x or 1.6.x and the '''''corresponding''''' Python bindings. Older versions starting from 1.0, like 1.2.4, 1.3.2 or 1.4.2, etc. should still work. For troubleshooting information, check the [trac:TracSubversion#Troubleshooting TracSubversion] page. There are [http://subversion.apache.org/packages.html pre-compiled SWIG bindings] available for various platforms. (Good luck finding precompiled SWIG bindings for any Windows package at that listing. TracSubversion points you to [http://alagazam.net Algazam], which works for me under Python 2.6.) Note that Trac '''doesn't''' use [http://pysvn.tigris.org/ PySVN], neither does it work yet with the newer ctype-style bindings. '''Please note:''' if using Subversion, Trac must be installed on the '''same machine'''. Remote repositories are currently [trac:ticket:493 not supported]. ===== Others ===== Support for other version control systems is provided via third-parties. See [trac:PluginList] and [trac:VersionControlSystem]. ==== Web Server ==== A web server is optional because Trac is shipped with a server included, see the [#RunningtheStandaloneServer Running the Standalone Server ] section below. Alternatively you configure Trac to run in any of the following environments. ==== Subversion [http://subversion.apache.org/ Subversion], 1.6.x or later and the '''''corresponding''''' Python bindings. There are [http://subversion.apache.org/packages.html pre-compiled SWIG bindings] available for various platforms. (Good luck finding precompiled SWIG bindings for any Windows package at that listing. [trac:TracSubversion] points you to [http://alagazam.net Alagazam], which works for me under Python 2.6.) For troubleshooting information, see the [trac:TracSubversion#Troubleshooting TracSubversion] page. {{{#!div style="border: 1pt dotted; margin: 1em" **Note:** * Trac '''doesn't''' use [http://pysvn.tigris.org/ PySVN], nor does it work yet with the newer ctype-style bindings. * If using Subversion, Trac must be installed on the '''same machine'''. Remote repositories are currently [trac:ticket:493 not supported]. }}} ==== Git [http://git-scm.com/ Git] 1.5.6 or later is supported. More information is available on the [trac:TracGit] page. ==== Other Version Control Systems Support for other version control systems is provided via third-party plugins. See [trac:PluginList#VersionControlSystems] and [trac:VersionControlSystem]. ==== Web Server A web server is optional because Trac is shipped with a server included, see the [#RunningtheStandaloneServer Running the Standalone Server] section below. Alternatively you can configure Trac to run in any of the following environments: * [http://httpd.apache.org/ Apache] with - [http://code.google.com/p/modwsgi/ mod_wsgi], see [wiki:TracModWSGI] and http://code.google.com/p/modwsgi/wiki/IntegrationWithTrac - [http://modpython.org/ mod_python 3.3.1], deprecated: see TracModPython) * [https://github.com/GrahamDumpleton/mod_wsgi mod_wsgi], see [wiki:TracModWSGI] and [http://code.google.com/p/modwsgi/wiki/IntegrationWithTrac ModWSGI IntegrationWithTrac]. * [http://modpython.org/ mod_python 3.5.0], see TracModPython * a [http://www.fastcgi.com/ FastCGI]-capable web server (see TracFastCgi) * an [http://tomcat.apache.org/connectors-doc/ajp/ajpv13a.html AJP]-capable web server (see [trac:TracOnWindowsIisAjp TracOnWindowsIisAjp]) * Microsoft IIS with FastCGI and a FastCGI-to-WSGI gateway (see [trac:CookBook/Installation/TracOnWindowsIisWfastcgi IIS with FastCGI]) * a CGI-capable web server (see TracCgi), '''but usage of Trac as a cgi script is highly discouraged''', better use one of the previous options. ==== Other Python Packages ==== * [http://babel.edgewall.org Babel], version >= 0.9.5, needed for localization support (unreleased version 1.0dev should work as well) ==== Other Python Packages * [http://babel.edgewall.org Babel], version 0.9.6 or >= 1.3, needed for localization support * [http://docutils.sourceforge.net/ docutils], version >= 0.3.9 for WikiRestructuredText. * [http://pygments.pocoo.org Pygments] for [wiki:TracSyntaxColoring syntax highlighting]. [http://silvercity.sourceforge.net/ SilverCity] and/or [http://gnu.org/software/enscript/enscript.html Enscript] may still be used but are deprecated and you really should be using Pygments. * [http://pygments.org Pygments] for [TracSyntaxColoring syntax highlighting]. * [http://pytz.sf.net pytz] to get a complete list of time zones, otherwise Trac will fall back on a shorter list from an internal time zone implementation. '''Attention''': The various available versions of these dependencies are not necessarily interchangable, so please pay attention to the version numbers above. If you are having trouble getting Trac to work please double-check all the dependencies before asking for help on the [trac:MailingList] or [trac:IrcChannel]. Please refer to the documentation of these packages to find out how they are best installed. In addition, most of the [trac:TracInstallPlatforms platform-specific instructions] also describe the installation of the dependencies. Keep in mind however that the information there ''probably concern older versions of Trac than the one you're installing'' (there are even some pages that are still talking about Trac 0.8!). == Installing Trac == {{{#!div style="border: 1pt dotted; margin: 1em" **Attention**: The available versions of these dependencies are not necessarily interchangeable, so please pay attention to the version numbers. If you are having trouble getting Trac to work, please double-check all the dependencies before asking for help on the [trac:MailingList] or [trac:IrcChannel]. }}} Please refer to the documentation of these packages to find out how they are best installed. In addition, most of the [trac:TracInstallPlatforms platform-specific instructions] also describe the installation of the dependencies. Keep in mind however that the information there ''probably concern older versions of Trac than the one you're installing''. == Installing Trac The [TracAdmin trac-admin] command-line tool, used to create and maintain [TracEnvironment project environments], as well as the [TracStandalone tracd] standalone server are installed along with Trac. There are several methods for installing Trac. It is assumed throughout this guide that you have elevated permissions as the root user or by prefixing commands with sudo. The umask 0002 should be used for a typical installation on a Unix-based platform. === Using easy_install One way to install Trac is using [http://pypi.python.org/pypi/setuptools setuptools]. With setuptools you can install Trac from the subversion repository; Trac can be installed from PyPI or the Subversion repository using [http://pypi.python.org/pypi/setuptools setuptools]. A few examples: - install Trac 1.0: {{{ easy_install Trac==1.0 }}} (NOT YET ENABLED) - install latest development version 1.0dev: {{{ easy_install Trac==dev }}} - Install the latest stable version of Trac: {{{#!sh$ easy_install Trac }}} - Install latest development version: {{{#!sh $easy_install http://download.edgewall.org/trac/Trac-latest-dev.tar.gz }}} Note that in this case you won't have the possibility to run a localized version of Trac; either use a released version or install from source More information can be found on the [trac:wiki:setuptools setuptools] page. {{{#!div style="border: 1pt dotted; margin: 1em" **Setuptools Warning:** If the version of your setuptools is in the range 5.4 through 5.6, the environment variable PKG_RESOURCES_CACHE_ZIP_MANIFESTS must be set in order to avoid significant performance degradation. More information may be found in [#DeployingTrac Deploying Trac]. }}} === Using pip 'pip' is an easy_install replacement that is very useful to quickly install python packages. To get a trac installation up and running in less than 5 minutes: To get a Trac installation up and running in less than 5 minutes: Assuming you want to have your entire pip installation in /opt/user/trac - {{{ pip -E /opt/user/trac install trac psycopg2 {{{#!sh$ pip install trac psycopg2 }}} or - {{{ pip -E /opt/user/trac install trac mysql-python }}} Make sure your OS specific headers are available for pip to automatically build PostgreSQL (libpq-dev) or MySQL (libmysqlclient-dev) bindings. pip will automatically resolve all dependencies (like Genshi, pygments, etc.) and download the latest packages on pypi.python.org and create a self contained installation in /opt/user/trac. {{{#!sh $pip install trac mysql-python }}} Make sure your OS specific headers are available for pip to automatically build PostgreSQL (libpq-dev) or MySQL (libmysqlclient-dev) bindings. pip will automatically resolve all dependencies (like Genshi, pygments, etc.), download the latest packages from pypi.python.org and create a self contained installation in /opt/user/trac. All commands (tracd, trac-admin) are available in /opt/user/trac/bin. This can also be leveraged for mod_python (using PythonHandler directive) and mod_wsgi (using WSGIDaemonProcess directive) Additionally, you can install several trac plugins (listed [http://pypi.python.org/pypi?:action=search&term=trac&submit=search here]) through pip. Additionally, you can install several Trac plugins (listed [https://pypi.python.org/pypi?:action=browse&show=all&c=516 here]) through pip. === From source Of course, using the python-typical setup at the top of the source directory also works. You can obtain the source for a .tar.gz or .zip file corresponding to a release (e.g. Trac-1.0.tar.gz), or you can get the source directly from the repository (see Trac:SubversionRepository for details). {{{ Using the python-typical setup at the top of the source directory also works. You can obtain the source for a .tar.gz or .zip file corresponding to a release (e.g. Trac-1.0.tar.gz) from the [trac:TracDownload] page, or you can get the source directly from the repository. See [trac:TracRepositories#OfficialSubversionrepository TracRepositories] for details. {{{#!sh$ python ./setup.py install }}} ''You'll need root permissions or equivalent for this step.'' This will byte-compile the python source code and install it as an .egg file or folder in the site-packages directory of your Python installation. The .egg will also contain all other resources needed by standard Trac, such as htdocs and templates. The script will also install the [wiki:TracAdmin trac-admin] command-line tool, used to create and maintain [wiki:TracEnvironment project environments], as well as the [wiki:TracStandalone tracd] standalone server. If you install from source and want to make Trac available in other languages, make sure  Babel is installed. Only then, perform the install (or simply redo the install once again afterwards if you realize Babel was not yet installed): {{{ ''You will need root permissions or equivalent for this step.'' This will byte-compile the Python source code and install it as an .egg file or folder in the site-packages directory of your Python installation. The .egg will also contain all other resources needed by standard Trac, such as htdocs and templates. If you install from source and want to make Trac available in other languages, make sure Babel is installed. Only then, perform the install (or simply redo the install once again afterwards if you realize Babel was not yet installed): {{{#!sh $python ./setup.py install }}} Alternatively, you can do a bdist_egg and copy the .egg from dist/ to the place of your choice, or you can create a Windows installer (bdist_wininst). === Advanced Options === Alternatively, you can run bdist_egg and copy the .egg from dist/ to the place of your choice, or you can create a Windows installer (bdist_wininst). === Using installer On Windows, Trac can be installed using the exe installers available on the [trac:TracDownload] page. Installers are available for the 32-bit and 64-bit versions of Python. Make sure to use the installer that matches the architecture of your Python installation. === Using package manager Trac may be available in your platform's package repository. Note however, that the version provided by your package manager may not be the latest release. === Advanced easy_install Options To install Trac to a custom location, or find out about other advanced installation options, run: {{{ easy_install --help }}} Also see [http://docs.python.org/inst/inst.html Installing Python Modules] for detailed information. {{{#!sh$ easy_install --help }}} Also see [http://docs.python.org/2/install/index.html Installing Python Modules] for detailed information. Specifically, you might be interested in: {{{ easy_install --prefix=/path/to/installdir }}} or, if installing Trac to a Mac OS X system: {{{ easy_install --prefix=/usr/local --install-dir=/Library/Python/2.5/site-packages }}} Note: If installing on Mac OS X 10.6 running {{{ easy_install http://svn.edgewall.org/repos/trac/trunk }}} will install into {{{ /usr/local }}} and {{{ /Library/Python/2.6/site-packages }}} by default The above will place your tracd and trac-admin commands into /usr/local/bin and will install the Trac libraries and dependencies into /Library/Python/2.5/site-packages, which is Apple's preferred location for third-party Python application installations. == Creating a Project Environment == A [TracEnvironment Trac environment] is the backend storage where Trac stores information like wiki pages, tickets, reports, settings, etc. An environment is basically a directory that contains a human-readable [TracIni configuration file], and various other files and directories. A new environment is created using [wiki:TracAdmin trac-admin]: {{{ {{{#!sh $easy_install --prefix=/path/to/installdir }}} or, if installing Trac on a Mac OS X system: {{{#!sh$ easy_install --prefix=/usr/local --install-dir=/Library/Python/2.6/site-packages }}} {{{#!div style="border: 1pt dotted; margin: 1em" **Mac OS X Note:** On Mac OS X 10.6,  running easy_install trac will install into /usr/local and /Library/Python/2.6/site-packages by default. The tracd and trac-admin commands will be placed in /usr/local/bin and will install the Trac libraries and dependencies into /Library/Python/2.6/site-packages, which is Apple's preferred location for third-party Python application installations. }}} == Creating a Project Environment A [TracEnvironment Trac environment] is the backend where Trac stores information like wiki pages, tickets, reports, settings, etc. An environment is a directory that contains a human-readable [TracIni configuration file], and other files and directories. A new environment is created using [TracAdmin trac-admin]: {{{#!sh $trac-admin /path/to/myproject initenv }}} [TracAdmin trac-admin] will prompt you for the information it needs to create the environment, such as the name of the project and the [TracEnvironment#DatabaseConnectionStrings database connection string]. If you're not sure what to specify for one of these options, just press  to use the default value. Using the default database connection string in particular will always work as long as you have SQLite installed. For the other [DatabaseBackend database backends] you should plan ahead and already have a database ready to use at this point. Since 0.12, Trac doesn't ask for a [TracEnvironment#SourceCodeRepository source code repository] anymore when creating an environment. Repositories can be [TracRepositoryAdmin added] afterward, or the version control support can be disabled completely if you don't need it. Also note that the values you specify here can be changed later by directly editing the [TracIni conf/trac.ini] configuration file. You will be prompted for the information needed to create the environment: the name of the project and the [TracEnvironment#DatabaseConnectionStrings database connection string]. If you're not sure what to specify for any of these options, just press  to use the default value. Using the default database connection string will always work as long as you have SQLite installed. For the other [trac:DatabaseBackend database backends] you should plan ahead and already have a database ready to use at this point. Also note that the values you specify here can be changed later using TracAdmin or directly editing the [TracIni conf/trac.ini] configuration file. {{{#!div style="border: 1pt dotted; margin: 1em" **Filesystem Warning:** When selecting the location of your environment, make sure that the filesystem on which the environment directory resides supports sub-second timestamps (i.e. **not** ext2 or ext3 on Linux, or HFS+ on OSX), as the modification time of the conf/trac.ini file will be monitored to decide whether an environment restart is needed or not. A too coarse-grained timestamp resolution may result in inconsistencies in Trac < 1.0.2. The best advice is to opt for a platform with sub-second timestamp resolution, regardless of the Trac version. }}} Finally, make sure the user account under which the web front-end runs will have '''write permissions''' to the environment directory and all the files inside. This will be the case if you run trac-admin ... initenv as this user. If not, you should set the correct user afterwards. For example on Linux, with the web server running as user apache and group apache, enter: {{{ # chown -R apache.apache /path/to/myproject }}} {{{#!sh$ chown -R apache:apache /path/to/myproject }}} The actual username and groupname of the apache server may not be exactly apache, and are specified in the Apache configuration file by the directives User and Group (if Apache httpd is what you use). {{{#!div class=important }}} == Deploying Trac === Running the Standalone Server === After having created a Trac environment, you can easily try the web interface by running the standalone server [wiki:TracStandalone tracd]: {{{ {{{#!div style="border: 1pt dotted; margin: 1em" **Setuptools Warning:** If the version of your setuptools is in the range 5.4 through 5.6, the environment variable PKG_RESOURCES_CACHE_ZIP_MANIFESTS must be set in order to avoid significant performance degradation. If running tracd, the environment variable can be set system-wide or for just the user that runs the tracd process. There are several ways to accomplish this in addition to what is discussed here, and depending on the distribution of your OS. To be effective system-wide a shell script with the export statement may be added to /etc/profile.d. To be effective for a user session the export statement may be added to ~/.profile. {{{#!sh export PKG_RESOURCES_CACHE_ZIP_MANIFESTS=1 }}} Alternatively, the variable can be set in the shell before executing tracd: {{{#!sh $PKG_RESOURCES_CACHE_ZIP_MANIFESTS=1 tracd --port 8000 /path/to/myproject }}} If running the Apache web server, !Ubuntu/Debian users should add the export statement to /etc/apache2/envvars. !RedHat/CentOS/Fedora should can add the export statement to /etc/sysconfig/httpd. }}} === Running the Standalone Server After having created a Trac environment, you can easily try the web interface by running the standalone server [TracStandalone tracd]: {{{#!sh$ tracd --port 8000 /path/to/myproject }}} Then, fire up a browser and visit http://localhost:8000/. You should get a simple listing of all environments that tracd knows about. Follow the link to the environment you just created, and you should see Trac in action. If you only plan on managing a single project with Trac you can have the standalone server skip the environment list by starting it like this: {{{ {{{#!sh $tracd -s --port 8000 /path/to/myproject }}} === Running Trac on a Web Server === === Running Trac on a Web Server Trac provides various options for connecting to a "real" web server: - [wiki:TracFastCgi FastCGI] - [wiki:TracModWSGI mod_wsgi] - //[wiki:TracModPython mod_python] (no longer recommended, as mod_python is not actively maintained anymore)// - //[wiki:TracCgi CGI] (should not be used, as the performance is far from optimal)// - [TracFastCgi FastCGI] - [wiki:TracModWSGI Apache with mod_wsgi] - [TracModPython Apache with mod_python] - [TracCgi CGI] //(should not be used, as the performance is far from optimal)// Trac also supports [trac:TracOnWindowsIisAjp AJP] which may be your choice if you want to connect to IIS. Other deployment scenarios are possible: [trac:TracNginxRecipe nginx], [http://projects.unbit.it/uwsgi/wiki/Example#Traconapacheinasub-uri uwsgi], [trac:TracOnWindowsIisIsapi Isapi-wsgi] etc. ==== Generating the Trac cgi-bin directory ==== #cgi-bin In order for Trac to function properly with FastCGI you need to have a trac.fcgi file and for mod_wsgi a trac.wsgi file. These are Python scripts which load the appropriate Python code. They can be generated using the deploy option of [wiki:TracAdmin trac-admin]. There is, however, a bit of a chicken-and-egg problem. The [wiki:TracAdmin trac-admin] command requires an existing environment to function, but complains if the deploy directory already exists. This is a problem, because environments are often stored in a subdirectory of the deploy. The solution is to do something like this: {{{ mkdir -p /usr/share/trac/projects/my-project trac-admin /usr/share/trac/projects/my-project initenv trac-admin /usr/share/trac/projects/my-project deploy /tmp/deploy mv /tmp/deploy/* /usr/share/trac }}} ==== Mapping Static Resources ==== Out of the box, Trac will pass static resources such as style sheets or images through itself. For anything but a tracd only based deployment, this is far from optimal as the web server could be set up to directly serve those static resources (for CGI setup, this is '''highly undesirable''' and will cause abysmal performance). Web servers such as [http://httpd.apache.org/ Apache] allow you to create “Aliases” to resources, giving them a virtual URL that doesn't necessarily reflect the layout of the servers file system. We also can map requests for static resources directly to the directory on the file system, avoiding processing these requests by Trac itself. There are two primary URL paths for static resources - /chrome/common and /chrome/site. Plugins can add their own resources, usually accessible by /chrome/ path, so its important to override only known paths and not try to make universal /chrome alias for everything. Note that in order to get those static resources on the filesystem, you need first to extract the relevant resources from Trac using the [TracAdmin trac-admin] deploy command: ==== Generating the Trac cgi-bin directory #cgi-bin Application scripts for CGI, FastCGI and mod-wsgi can be generated using the [TracAdmin trac-admin] deploy command: [[TracAdminHelp(deploy)]] The target  will then contain an htdocs directory with: - site/ - a copy of the environment's directory htdocs/ - common/ - the static resources of Trac itself - / - one directory for each resource directory managed by the plugins enabled for this environment ===== Example: Apache and ScriptAlias ===== #ScriptAlias-example Assuming the deployment has been done this way: {{{$ trac-admin /var/trac/env deploy /path/to/trac/htdocs/common }}} Add the following snippet to Apache configuration ''before'' the ScriptAlias or WSGIScriptAlias (which map all the other requests to the Trac application), changing paths to match your deployment: {{{ Grant the web server execution right on scripts in the cgi-bin directory. For example, the following yields a typical directory structure: {{{#!sh $mkdir -p /var/trac$ trac-admin /var/trac/ initenv $trac-admin /var/trac/ deploy /var/www$ ls /var/www cgi-bin htdocs $chmod ugo+x /var/www/cgi-bin/* }}} ==== Mapping Static Resources Without additional configuration, Trac will handle requests for static resources such as stylesheets and images. For anything other than a TracStandalone deployment, this is not optimal as the web server can be set up to directly serve the static resources. For CGI setup, this is '''highly undesirable''' as it causes abysmal performance. Web servers such as [http://httpd.apache.org/ Apache] allow you to create //Aliases// to resources, giving them a virtual URL that doesn't necessarily reflect their location on the file system. We can map requests for static resources directly to directories on the file system, to avoid Trac processing the requests. There are two primary URL paths for static resources: /chrome/common and /chrome/site. Plugins can add their own resources, usually accessible at the /chrome/ path. A single /chrome alias can used if the static resources are extracted for all plugins. This means that the deploy command (discussed in the previous section) must be executed after installing or updating a plugin that provides static resources, or after modifying resources in the $env/htdocs directory. This is probably appropriate for most installations but may not be what you want if, for example, you wish to upload plugins through the //Plugins// administration page. The deploy command creates an htdocs directory with: - common/ - the static resources of Trac - site/ - a copy of the environment's htdocs/ directory - shared - the static resources shared by multiple Trac environments, with a location defined by the [inherit] htdocs_dir option - / - one directory for each resource directory provided by the plugins enabled for this environment The example that follows will create a single /chrome alias. If that isn't the correct approach for your installation you simply need to create more specific aliases: {{{#!apache Alias /trac/chrome/common /path/to/trac/htdocs/common Alias /trac/chrome/site /path/to/trac/htdocs/site Alias /trac/chrome/shared /path/to/trac/htdocs/shared Alias /trac/chrome/ /path/to/trac/htdocs/ }}} ===== Example: Apache and ScriptAlias #ScriptAlias-example Assuming the deployment has been done this way: {{{#!sh $trac-admin /var/trac/ deploy /var/www }}} Add the following snippet to Apache configuration, changing paths to match your deployment. The snippet must be placed ''before'' the ScriptAlias or WSGIScriptAlias directive, because those directives map all requests to the Trac application: {{{#!apache Alias /trac/chrome /path/to/trac/htdocs Order allow,deny Allow from all # For Apache 2.2 Order allow,deny Allow from all # For Apache 2.4 Require all granted }}} If using mod_python, you might want to add this too (otherwise, the alias will be ignored): {{{ If using mod_python, add this too, otherwise the alias will be ignored: {{{#!apache SetHandler None }}} Note that we mapped /trac part of the URL to the trac.*cgi script, and the path /trac/chrome/common is the path you have to append to that location to intercept requests to the static resources. Similarly, if you have static resources in a project's htdocs directory (which is referenced by /trac/chrome/site URL in themes), you can configure Apache to serve those resources (again, put this ''before'' the ScriptAlias or WSGIScriptAlias for the .*cgi scripts, and adjust names and locations to match your installation): {{{ Alternatively, if you wish to serve static resources directly from your project's htdocs directory rather than the location to which the files are extracted with the deploy command, you can configure Apache to serve those resources. Again, put this ''before'' the ScriptAlias or WSGIScriptAlias for the .*cgi scripts, and adjust names and locations to match your installation: {{{#!apache Alias /trac/chrome/site /path/to/projectenv/htdocs Order allow,deny Allow from all # For Apache 2.2 Order allow,deny Allow from all # For Apache 2.4 Require all granted }}} Alternatively to aliasing /trac/chrome/common, you can tell Trac to generate direct links for those static resources (and only those), using the [[wiki:TracIni#trac-section| [trac] htdocs_location]] configuration setting: {{{ Another alternative to aliasing /trac/chrome/common is having Trac generate direct links for those static resources (and only those), using the [TracIni#trac-section htdocs_location] configuration setting: {{{#!ini [trac] htdocs_location = http://static.example.org/trac-common/ }}} Note that this makes it easy to have a dedicated domain serve those static resources (preferentially [http://code.google.com/speed/page-speed/docs/request.html#ServeFromCookielessDomain cookie-less]). Note that this makes it easy to have a dedicated domain serve those static resources, preferentially cookie-less. Of course, you still need to make the Trac htdocs/common directory available through the web server at the specified URL, for example by copying (or linking) the directory into the document root of the web server: {{{ {{{#!sh$ ln -s /path/to/trac/htdocs/common /var/www/static.example.org/trac-common }}} ==== Setting up the Plugin Cache ==== Some Python plugins need to be extracted to a cache directory. By default the cache resides in the home directory of the current user. When running Trac on a Web Server as a dedicated user (which is highly recommended) who has no home directory, this might prevent the plugins from starting. To override the cache location you can set the PYTHON_EGG_CACHE environment variable. Refer to your server documentation for detailed instructions on how to set environment variables. == Configuring Authentication == Trac uses HTTP authentication. You'll need to configure your webserver to request authentication when the .../login URL is hit (the virtual path of the "login" button). Trac will automatically pick the REMOTE_USER variable up after you provide your credentials. Therefore, all user management goes through your web server configuration. Please consult the documentation of your web server for more info. ==== Setting up the Plugin Cache #egg-cache Some Python plugins need to be extracted to a cache directory. By default the cache resides in the home directory of the current user. When running Trac on a Web Server as a dedicated user (which is highly recommended) who has no home directory, this might prevent the plugins from starting. To override the cache location you can set the PYTHON_EGG_CACHE environment variable. Refer to your server documentation for detailed instructions on how to set environment variables. If you setup hook scripts that call Trac, such as the Subversion post-commit hook script provided in the /contrib directory, make sure you define the PYTHON_EGG_CACHE environment variable within these scripts as well. == Configuring Authentication Trac uses HTTP authentication. You'll need to configure your webserver to request authentication when the .../login URL is hit (the virtual path of the "login" button). Trac will automatically pick the REMOTE_USER variable up after you provide your credentials. Therefore, all user management goes through your web server configuration. Please consult the documentation of your web server for more info. The process of adding, removing, and configuring user accounts for authentication depends on the specific way you run Trac. Please refer to one of the following sections: * TracStandalone#UsingAuthentication if you use the standalone server, tracd. * [wiki:TracModWSGI#ConfiguringAuthentication TracModWSGI#ConfiguringAuthentication] if you use the Apache web server, with any of its front end: mod_wsgi of course, but the same instructions applies also for mod_python, mod_fcgi or mod_fastcgi. * [wiki:TracModWSGI#ConfiguringAuthentication TracModWSGI#ConfiguringAuthentication] if you use the Apache web server, with any of its front end: mod_wsgi, mod_python, mod_fcgi or mod_fastcgi. * TracFastCgi if you're using another web server with FCGI support (Cherokee, Lighttpd, !LiteSpeed, nginx) [trac:TracAuthenticationIntroduction] also contains some useful information for beginners. == Granting admin rights to the admin user Grant admin rights to user admin: {{{ {{{#!sh \$ trac-admin /path/to/myproject permission add admin TRAC_ADMIN }}} This user will have an "Admin" entry menu that will allow you to admin your trac project. == Finishing the install === Automatic reference to the SVN changesets in Trac tickets === You can configure SVN to automatically add a reference to the changeset into the ticket comments, whenever changes are committed to the repository. The description of the commit needs to contain one of the following formulas: * '''Refs #123''' - to reference this changeset in #123 ticket * '''Fixes #123''' - to reference this changeset and close #123 ticket with the default status ''fixed'' This functionality requires a post-commit hook to be installed as described in [wiki:TracRepositoryAdmin#ExplicitSync TracRepositoryAdmin], and enabling the optional commit updater components by adding the following line to the [components] section of your [wiki:TracIni#components-section trac.ini], or enabling the components in the "Plugins" admin panel. {{{ tracopt.ticket.commit_updater.* = enabled }}} For more information, see the documentation of the CommitTicketUpdater component in the "Plugins" admin panel. === Using Trac === This user will have an //Admin// navigation item that directs to pages for administering your Trac project. == Configuring Trac TracRepositoryAdmin provides information on configuring version control repositories for your project. == Using Trac Once you have your Trac site up and running, you should be able to create tickets, view the timeline, browse your version control repository if configured, etc. Keep in mind that //anonymous// (not logged in) users can by default access only a few of the features, in particular they will have a read-only access to the resources. You will need to configure authentication and grant additional [wiki:TracPermissions permissions] to authenticated users to see the full set of features. Keep in mind that //anonymous// (not logged in) users can by default access only a few of the features, in particular they will have a read-only access to the resources. You will need to configure authentication and grant additional [TracPermissions permissions] to authenticated users to see the full set of features. '' Enjoy! ''