TABLE OF CONTENTS
- 1. /formFactor_ResProd
- 1.1. formFactor_ResProd/debugFlag
- 1.2. formFactor_ResProd/FF_ResProd
- 1.3. formFactor_ResProd/DeltaAxFF
- 1.4. formFactor_ResProd/MA
- 1.5. formFactor_ResProd/aDelta
- 1.6. formFactor_ResProd/bDelta
- 1.7. formFactor_ResProd/cDelta
- 1.8. formFactor_ResProd/DeltaCouplrelErr
- 1.9. formFactor_ResProd/HNV_axialFF
- 1.10. formFactor_ResProd/nenner_C5A_Lalakulich
- 1.11. formFactor_ResProd/refit_barnu_axialFF
- 1.12. formFactor_ResProd/W_cutOff_switch
- 1.13. formFactor_ResProd/W_cutOff_switchAll
- 1.14. formFactor_ResProd/W_cutOff_lambda
- 1.15. formFactor_ResProd/vector_FF_switch
- 1.16. formFactor_ResProd/axial_FF_switch
- 1.17. formFactor_ResProd/input_FF_ResProd
- 1.18. formFactor_ResProd/getFormfactor_Res
- 1.19. formFactor_ResProd/vectorformfactor_MAID_CM
- 1.20. formFactor_ResProd/vectorformfactor_MAIDLala
- 1.21. formFactor_ResProd/vectorformfactor_Lalakulich
- 1.22. formFactor_ResProd/axialformfactor
- 1.23. formFactor_ResProd/axialformfactor_Lalakulich
- 1.24. formFactor_ResProd/ff_resProd_setCutoff
/formFactor_ResProd [ Modules ]
NAME
module formFactor_ResProd
PURPOSE
Provides the form factors for electro-weak resonance excitation.
INPUTS
Via FF_ResProd (namelist "input_FF_ResProd" in the Jobcard) one might choose whether the form factors are calculated from MAID's helicity amplitudes directly or whether the fit of Lalakulich (PRD 74, 014009 (2006)) is used.
formFactor_ResProd/debugFlag [ Global module-variables ]
[ Top ] [ formFactor_ResProd ] [ Global module-variables ]
SOURCE
logical,save :: debugFlag=.false.
PURPOSE
Switch for debug information
formFactor_ResProd/FF_ResProd [ Global module-variables ]
[ Top ] [ formFactor_ResProd ] [ Global module-variables ]
SOURCE
integer, save :: FF_ResProd=0
PURPOSE
With FF_ResProd (namelist "input_FF_ResProd" in the Jobcard) one can choose how the form factors are calculated:
- 0: MAID's helicity amplitudes (Luis' helicity expressions - CM frame)
- 1: fit of Lalakulich (PRD 74, 014009 (2006))
- 2: MAID's helicity amplitudes (Lalakulich's helicity expressions - LAB frame)
formFactor_ResProd/DeltaAxFF [ Global module-variables ]
[ Top ] [ formFactor_ResProd ] [ Global module-variables ]
SOURCE
integer, save :: DeltaAxFF=1
PURPOSE
choose between different axial form factors for the Delta:
- 1: Adler
- 2: Paschos
- 3: dipol
formFactor_ResProd/MA [ Global module-variables ]
[ Top ] [ formFactor_ResProd ] [ Global module-variables ]
SOURCE
real, save :: MA=0.95 ! 0.95 tuned to ANL ! 1.3 tuned to BNL
PURPOSE
delta resonance axial mass parameter.
formFactor_ResProd/aDelta [ Global module-variables ]
[ Top ] [ formFactor_ResProd ] [ Global module-variables ]
SOURCE
real, save :: aDelta=-0.25
PURPOSE
fit parameter for C_5^A (Adler)
formFactor_ResProd/bDelta [ Global module-variables ]
[ Top ] [ formFactor_ResProd ] [ Global module-variables ]
SOURCE
real, save :: bDelta=0.04
PURPOSE
fit parameter for C_5^A (Adler)
formFactor_ResProd/cDelta [ Global module-variables ]
[ Top ] [ formFactor_ResProd ] [ Global module-variables ]
SOURCE
real, save :: cDelta=3.
PURPOSE
fit parameter for C_5^A (Paschos)
formFactor_ResProd/DeltaCouplrelErr [ Global module-variables ]
[ Top ] [ formFactor_ResProd ] [ Global module-variables ]
SOURCE
real, save :: DeltaCouplrelErr=0.
PURPOSE
error in percent for C_5^A(0) for the Delta
formFactor_ResProd/HNV_axialFF [ Global module-variables ]
[ Top ] [ formFactor_ResProd ] [ Global module-variables ]
SOURCE
logical, save :: HNV_axialFF=.false.
PURPOSE
With .true. or .false. HNV_axialFF (namelist "input_FF_ResProd" in the Jobcard) one can choose which axial form factors to use for Delta-resonance:
- .true. is Hernandez-Nieves-Valverde fit with C5A=0.867,MA=0.985 (PRD 76)
- .false. is as it was used by Lalakulich et al in PRD 74
formFactor_ResProd/nenner_C5A_Lalakulich [ Global module-variables ]
[ Top ] [ formFactor_ResProd ] [ Global module-variables ]
SOURCE
real, save :: nenner_C5A_Lalakulich=3.0
PURPOSE
Factor wich appear in the Lalakulich parameterization of the axial C_5^A form factor 3.0 was fitted to BNL and used in Lalakulich PRD71 and PRD 74 fit of ANL gave 0.5
formFactor_ResProd/refit_barnu_axialFF [ Global module-variables ]
[ Top ] [ formFactor_ResProd ] [ Global module-variables ]
SOURCE
logical, save :: refit_barnu_axialFF=.false.
PURPOSE
With .true. refit_barnu_axialFF (namelist "input_FF_ResProd" in the Jobcard) means that the axial form factors are refitted to explain the low value of antineutrino cross section ( exper data Bolognese PLB81,393 (1979) )
formFactor_ResProd/W_cutOff_switch [ Global module-variables ]
[ Top ] [ formFactor_ResProd ] [ Global module-variables ]
SOURCE
logical, save :: W_cutOff_switch=.false.
PURPOSE
Switch to include a W-dependent cut-off function for the vector form factor of the Delta:
- false = excluded
- true = included
formFactor_ResProd/W_cutOff_switchAll [ Global module-variables ]
[ Top ] [ formFactor_ResProd ] [ Global module-variables ]
SOURCE
logical, save :: W_cutOff_switchAll=.false.
PURPOSE
Switch to include a W-dependent cut-off function for the vector and the axial form factor of all resonances:
- false = excluded
- true = included
NOTES
we assume the same dependence as for the Delta vector form factor
formFactor_ResProd/W_cutOff_lambda [ Global module-variables ]
[ Top ] [ formFactor_ResProd ] [ Global module-variables ]
SOURCE
real, save :: W_cutOff_lambda=1.071
PURPOSE
Value for lambda in the W-dependent cut-off function.
formFactor_ResProd/vector_FF_switch [ Global module-variables ]
[ Top ] [ formFactor_ResProd ] [ Global module-variables ]
SOURCE
logical, save :: vector_FF_switch=.true.
PURPOSE
Switch to turn off the vector form factors:
- false = off
- true = on
formFactor_ResProd/axial_FF_switch [ Global module-variables ]
[ Top ] [ formFactor_ResProd ] [ Global module-variables ]
SOURCE
logical, save :: axial_FF_switch=.true.
PURPOSE
Switch to turn off the axial form factors:
- false = off
- true = on
formFactor_ResProd/input_FF_ResProd [ Namelists ]
[ Top ] [ formFactor_ResProd ] [ Namelists ]
NAME
NAMELIST /input_FF_ResProd/
PURPOSE
This Namelist for module "formFactor_ResProd" includes:
- FF_ResProd
- debugFlag
- aDelta
- bDelta
- cDelta
- DeltaAxFF
- HNV_axialFF
- nenner_C5A_Lalakulich
- refit_barnu_axialFF
- W_cutOff_lambda
- W_cutOff_switch
- vector_FF_switch
- axial_FF_switch
- W_cutOff_switchAll
- DeltaCouplrelErr
- MA
formFactor_ResProd/getFormfactor_Res [ Functions ]
[ Top ] [ formFactor_ResProd ] [ Functions ]
NAME
function getFormfactor_Res (Qs, bare_mass, resID, targetCharge, process, FF_set)
PURPOSE
This function serves as an interface to the subroutines which calculate the form factors.
INPUTS
- real :: Qs -- momentum transfer
- real :: bare_mass -- bare mass of the resonance (no potentials included!)
- integer :: resID -- ID of resonance (see IDtable)
- integer :: targetCharge -- charge of target (nucleon)
- integer :: process -- EM, CC or NC (or anti if negative)
- logical :: FF_set -- controll flag whether form factors have been set successfully
OUTPUT
real, dimension(1:8) :: getFormfactor_Res -- first 4 entries contain the vector form factors, last 4 entries contain the axial form factors
formFactor_ResProd/vectorformfactor_MAID_CM [ Subroutines ]
[ Top ] [ formFactor_ResProd ] [ Subroutines ]
NAME
subroutine vectorformfactor_MAID_CM(vecformfactor,Qs,resID,targetCharge,process,FF_set)
PURPOSE
returns the vector form factors calculated using the MAID helicity amplitudes, helicity amplitudes from Luis are used (CM frame!!)
INPUTS
- real :: Qs -- momentum transfer
- integer :: resID -- ID of resonance (see IDtable)
- integer :: targetCharge -- charge of target (nucleon)
- integer :: process -- EM, CC or NC (or anti if negative)
- logical :: FF_set -- controll flag whether form factors have been set successfully
OUTPUT
- real, dimension(1:4):: vecformfactor -- contains the vector FF
formFactor_ResProd/vectorformfactor_MAIDLala [ Subroutines ]
[ Top ] [ formFactor_ResProd ] [ Subroutines ]
NAME
subroutine vectorformfactor_MAIDLala(vecformfactor,Qs,resID,targetCharge,process,FF_set)
PURPOSE
returns the vector form factors calculated using the MAID helicity amplitudes, helicity amplitudes from Lalakulich are used
INPUTS
- real :: Qs -- momentum transfer
- integer :: resID -- ID of resonance (see IDtable)
- integer :: targetCharge -- charge of target (nucleon)
- integer :: process -- EM, CC or NC (or anti if negative)
- logical :: FF_set -- controll flag whether form factors have been set successfully
OUTPUT
- real, dimension(1:4):: vecformfactor -- contains the vector FF
formFactor_ResProd/vectorformfactor_Lalakulich [ Subroutines ]
[ Top ] [ formFactor_ResProd ] [ Subroutines ]
NAME
subroutine vectorformfactor_Lalakulich(vecformfactor,Qs,resID,targetCharge,process,FF_set)
PURPOSE
returns the vector form factors according to a fit by Lalakulich et al. PRD 74, 014009 (2006).
INPUTS
- real :: Qs -- momentum transfer
- integer :: resID -- ID of resonance (see IDtable)
- integer :: targetCharge -- charge of target (nucleon)
- integer :: process -- EM, CC or NC (or anti if negative)
- logical :: FF_set -- controll flag whether form factors have been set successfully
OUTPUT
- real, dimension(1:4):: vecformfactor -- contains the vector FF
formFactor_ResProd/axialformfactor [ Subroutines ]
[ Top ] [ formFactor_ResProd ] [ Subroutines ]
NAME
subroutine axialformfactor(axialformfactor,Qs,resID,targetCharge,process,FF_set)
PURPOSE
returns the axial form factors, see Tina's notes and Mathematica notebook 'axialff_coupling.nb' for the calculation of the axial couplings
INPUTS
- real :: Qs -- momentum transfer
- integer :: resID -- ID of resonance (see IDtable)
- integer :: targetCharge -- charge of target (nucleon)
- integer :: process -- EM, CC or NC (or anti if negative)
- logical :: FF_set -- controll flag whether form factors have been set successfully
OUTPUT
- real, dimension(1:4):: axialff -- contains the axial FF
formFactor_ResProd/axialformfactor_Lalakulich [ Subroutines ]
[ Top ] [ formFactor_ResProd ] [ Subroutines ]
NAME
subroutine axialformfactor_Lalakulich(axialformfactor,Qs,resID,targetCharge,process,FF_set)
PURPOSE
returns the axial form factors according to a fit by Lalakulich et al. PRD 74, 014009 (2006).
INPUTS
- real :: Qs -- momentum transfer
- integer :: resID -- ID of resonance (see IDtable)
- integer :: targetCharge -- charge of target (nucleon)
- integer :: process -- EM, CC or NC (or anti if negative)
- logical :: FF_set -- controll flag whether form factors have been set successfully
OUTPUT
- real, dimension(1:4):: axialformfactor -- contains the axial FF
formFactor_ResProd/ff_resProd_setCutoff [ Subroutines ]
[ Top ] [ formFactor_ResProd ] [ Subroutines ]
NAME
subroutine ff_resProd_setCutoff(x)
INPUTS
real, intent(in) :: x -- new value for lambda in the W-dependence of the form factor
PURPOSE
Sets a new cut-off for the W-dependent form factor, in particular it sets W_cutoff_lambda=x.